南通附近想过夜电话联系

 Novente Chinese station Novente English station Novente Russian station
Current location: Manufacturer of gas wall mounted furnace > News and information > Company news >News details

News and information

NEWS CENTER

Wall mounted stove manufacturer: gas stove installation precautions

Time: June 11, 2020 10:06:15 source: untidycleanfreak.com Author: Jiangsu norwin gas wall mounted furnace manufacturer

Usually a family, wall mounted stove and gas stove are used together. The correct installation of gas stove can not only save energy, but also prevent the risk of gas pipeline leakage. Wall mounted furnace manufacturer The following is to talk about the matters needing attention in the installation of gas cookers. Let's have a look.

1. Standard installation, surface piping.

Gas facilities shall be installed by qualified personnel. Gas pipelines shall not be laid in bedrooms, bathrooms and toilets, but shall be exposed. This is because the gas pipeline is buried in the wall or concealed, once the gas leaks, it can not spread, and it is not easy to detect and check the safety. All the leaked gas is accumulated in the wall or cabinet. If the leakage is not conducive to timely repair, it is easy to deflate or fire in case of open fire; the maintenance is particularly difficult after the leakage of buried wall or concealed gas pipeline, so the wall surface must be broken or the cabinet should be dismantled It can only be repaired after it is destroyed, which causes great economic loss to users.

 Gas cooker

2. Reasonable space and height control.

The gas meter shall be set at the ventilation place, and shall not be closed and convenient for maintenance. The horizontal clear distance between the gas meter and the gas cooker shall not be less than 30cm. The net height of the room where the gas cooker is installed shall not be less than 2.2m. The kitchen shall be equipped with air inlet, and the room shall have natural lighting, and shall not be set in the basement or bedroom.

The clear distance between the gas cooker and the wall shall not be less than 10 cm; the clear distance between the edge of the gas cooker and the wood furniture shall not be less than 20 cm; the passageway between the gas cooker and the opposite wall shall not be less than 1 m; the corresponding fire prevention and heat insulation measures shall be taken between the gas cooker and the combustible wall; there shall be no combustible substances within 1 m around the stove.

3. Fire resistant stove, special pipe material.

The gas stove should be placed horizontally on the hearth made of refractory material. The stove should not be too high, generally 600-700 mm is appropriate. At the same time, the stove should be placed in the place where the air is in circulation, but do not let the through wind blow the stove directly, because the wind blowing flame will reduce the thermal efficiency of the stove, and may blow out the flame and cause gas leakage.

 Dual control gas stove

The gas cooker should be connected with stainless steel corrugated hose. If it is connected with rubber hose, it must be a special gas hose. It is not allowed to pass through or bend and flatten under the stove. The bending radius of the hose should be greater than 5cm. The two ends should be clamped tightly. The length should be appropriate, but it should not exceed 2m. If it is too long, it will increase the resistance of the inlet pipe, resulting in pressure drop, and reduce the heat flow of the stove The rubber tube is easy to fall off due to pulling phenomenon. The specification of the hose should be matched with the joint. If it is loose, the sealing will not be tight, resulting in air leakage. If it is too tight, it will accelerate the aging of the hose. In addition, check whether there are cracks on the rubber tube regularly. Because many stove fires are caused by connectors.

4. Embedded installation, suitable size.

When the embedded installation is selected, the hole must be opened in strict accordance with the requirements of the installation position and opening size in the instruction manual; the size of the opening should be appropriate, so as not to cause the table to crush the whole machine or make the panel bear the kitchen body gravity. In particular, glass panel cookers, when installing stoves, pay attention to the four corners of glass panel cookers should not be impacted by hard objects. The stainless steel hose must be used to prevent the gas from falling off.

Label: installation of gas cooker

this paper Wall mounted stove manufacturer: gas stove installation precautions :http://untidycleanfreak.com/news_ Detail-87.html is created by Jiangsu norwin thermal equipment Co., Ltd If you need to reprint the articles of our company, please keep the website of this article, thank you!

Disclaimer: part of our company's article information comes from the Internet. This website is only responsible for the arrangement, typesetting and editing of the articles. If there are copyright issues related to the articles and articles transferred, please contact us in time, and we will deal with them as soon as possible.

Share with:

previous page: How much energy saving is the best selling condensing wall mounted furnace?

Next page: Key points for installation of electric wall mounted furnace

TOP ↑

News related Company news Industry news

Related products See more

 background